|
|
Technology
Assessment & Research (TA&R) Program
|
Project
Number |
212 |
| Date of Summary |
December 31, 1993 |
| Subject |
Deep Water Subsea Conceptual
Studies, Phase 1 |
| Performing Activity |
Texaco Inc. |
| Principal Investigator |
Mr. Curtis Burton |
| Contracting Agency |
Minerals Management Service |
| Estimated Completion |
Complete |
| Description |
To develop a generic cost
effective subsea oil and gas production system design for deepwater operations in the Gulf
of Mexico. |
| Progress |
Complete. A difficult
economic environment and the technical uncertainties associated with Gulf of Mexico
deepwater developments requires cost effective design. Texaco is developing a design for a
generic system--a system with functional capabilities, production capacity, and economic
restraints, that are adaptable to a range of operating conditions. |
| |
This is a proprietary project,
the reports may not be available for release, at this time. |
Reports |
| AA |
Technical Report: CTR No. 205,
Subsea Separation and Multiphase Pumping Technology Survey; INTEC Engineering, Inc.,
December 1992. (Proprietary Document, not for release outside MMS) |
| AB |
Technical Report: CTR No. 210,
Transportation Options Study; INTEC Engineering, Inc., December 1992. (Proprietary
Document, not for release outside MMS) |
| AC |
Technical Report: CTR No. 220,
Pipeline Design and Installation; INTEC Engineering, Inc., December 1992. (Proprietary
Document, not for release outside MMS) |
| AD |
Technical Reports: CTR No. 230,
Control System; CTR No. 240, Chemical Injection System Study; CTR No. 250,
Manifold/Template Strategy; INTEC Engineering, Inc., December 1992. (Proprietary Document,
not for release outside MMS) |
| AE |
Technical Reports: CTR No. 260,
ROV Intervention Capability Study; CTR No. 270, Safety Requirements; CTR No. 280,
Diverless Installation, Inspection, Maintenance, and Repair Strategy; INTEC Engineering,
Inc., December 1992. (Proprietary Document, not for release outside MMS) |
| AF |
Technical Report: CTR No. 300,
Design Basis: Conceptual Design; INTEC Engineering, Inc., December 1992. (Proprietary
Document, not for release outside MMS) |
| AG |
Technical Report: CTR No. 700,
Final Report; INTEC Engineering, Inc., February 1993. (Proprietary Document, not for
release outside MMS) |
|
|
|
|